Current site: Peikko Ireland. Do you want to change country or language?
Current site: Peikko Ireland. Do you want to change country or language?
HPM® Rebar Anchor Bolts are used to anchor concrete or steel structures and machinery into concrete base structures. The product range is suitable for moderate loading conditions. This multipurpose anchor bolt is widely approved and adopted.
HPM® Rebar Anchor Bolts transfer tension, compression and shear forces to the reinforced concrete base structure (e.g. foundations). HPM® Rebar Anchor Bolts are used with HPKM® Column Shoes, SUMO® Wall Shoes or even with steel columns and machine fixings. There are two main anchor types:
The long anchor bolts transfer compression and tension forces through the rib bond of ribbed bars, while the short anchor bolts transfer them through the combination of headed studs and rib bond. PPL Anchor Bolt Installation Templates are provided to ensure easy and correct installation of the anchor bolts in castings and foundations. The HPM® Rebar Anchor Bolt as a steel part cast into concrete is designed according to Eurocodes or ACI 318M-11.
Comprehensive product information like resistances, required supplementary reinforcement, concrete grades, limitations of use etc. can be found within the Technical Manual. Product details may be country-specific. For design, always use product information that is localized for design's destination country. Country specific Technical Manuals can be found under Design Tools -page, or from website of the country in question.
HPM® Rebar Anchor Bolt - ETA, Installation Instructions, 09/2022
ETA (HPM® L, 2024): ETA-02/0006 (en, de)
Czech Republic (HPM® P): 204/C6/2019/070-055681
Finland (HPM® P, HPM® L HDG/ECO): BY 5B - EC 2 n:o 88
Germany: Z-30.6-39
Hungary: A-744/2/2007
Hungary (HPM® P): A-5/2017
Netherlands: K65974/02
Poland (HPM® P): ITB-KOT-2021/1895
Romania: 001SC-01-324-2023
Slovakia (HPM® P): SK TP – 14/0099
Slovakia (HPM® P): SK04 – ZSV – 1987
Turkey: No. 802
Ukraine: UA.GS.2.34.001-22
U.K.: UKTA-0836-23/6938
The product has the country- or area-specific approvals mentioned above. Products under different approvals may differ from each other, for example, in the case of anchoring lengths.
Anchor bolts are often used in various applications, from dry indoor conditions to harsh industrial conditions where additional protection against steel corrosion is needed. Anchor bolts are available with alternative protective coatings. Standard coating options for anchor bolts are described below. If other type of protection against corrosion is needed, please contact sales.
ECO Galvanizing
Peikko’s ECO Galvanizing is a cost-effective and ecological surface coating which allows anchor bolts to be galvanized partly or completely. The coating method is thermally sprayed zinc coating, according to EN ISO 2063. The minimum coating thickness is 100 µm, which corresponds to the performance of hot-dip galvanizing. The coating fulfils environmental class C3 of standard EN ISO 9223:2012. ECO Galvanizing is available for Anchor Bolt models HPM® 24 - 39 and PPM® 30 - 52.
Hot-Dip Galvanizing
Hot-Dip Galvanized (according to EN ISO 1461) anchor bolts are completely dipped into galvanized material. The method is suitable for HPM® and PPM® Anchor Bolts. The minimum coating thickness is 55 µm, which fulfils environmental class C3 of standard EN ISO 9223:2012.
Including a wide range of European design norms and several languages, Peikko Designer® has dedicated modules for:
The modern and intuitive user interface is based on interactive 3D graphics.
Peikko Toolbox includes Revit families and AutoCAD 2D blocks for many Peikko products. Peikko Toolbox supports Autodesk Revit, AutoCAD and AutoCAD LT versions 2016, 2017 and 2018. It includes product information and automatically notifies users of available updates.
Peikko offers free plugins to insert Peikko products and connections into your Tekla model. You can also create reports about Peikko products using the report template. Plugins include product information links and videos showing how products are used. It is also easy to check for plugin updates.
